Free shipping eligible*
In Stock

Aquael Rotor Fan Mini/1 Plus

SKU: 124686 Category: Brand:

$12.71 (inc. tax)

This item is available online only.
Free Delivery (Minimum Spend Required)*

Available in selected Australian postcodes only. Terms & Conditions

Dispatches in 1–4 Business Days*

Orders are dispatched once all items are ready.

Description

Aquael Rotor Fan Mini/1 Plus — Replacement rotor for the Aquael FAN Mini Plus and FAN 1 Plus internal filters

The FAN Plus filters are among the smallest in Aquael’s range, and their rotor is a tiny part that does a lot of work in a nano tank. Aquael Rotor Fan Mini/1 Plus (SKU: 124686) is the replacement rotor for the FAN Mini Plus and FAN 1 Plus internal filters, which use the same rotor. It spins in the sealed rotor chamber, drawing water through the sponge and returning it to the tank, and it is the item to fit when one of these small filters turns noisy, loses output or will not start after a clean. The FAN 2 Plus has its own rotor (SKU 100031), so the two should not be mixed up.

Aquael rates the FAN Mini Plus for tanks of 30 to 60 L with a flow of 260 L/h and a 4.2 W motor, and the FAN 1 Plus for 60 to 100 L at 320 L/h and 4.7 W. The Mini Plus body measures 4.4 × 5.3 × 15.1 cm and the 1 Plus 5.5 × 6.6 × 19.7 cm, so both are small enough to hide in a planted corner. Aquael describes the sealed rotor chamber as giving quiet operation with relatively low power consumption, and each model includes mechanical media. A German distributor lists a rotor for the FAN Mini/1 Plus, a separate one for the FAN Mikro and PAT Mini, and others for the FAN 2 Plus and 3 Plus. Aquael does not publish the rotor’s dimensions or material. It is a single replacement part, and the filter body and media are not included.

Usage & Application

When to Use

  • Nano tank noise: A small filter that buzzes or ticks where it used to run silently.
  • Weak outflow: The sponge is clean but a 260 or 320 L/h filter is moving less than it should.
  • Stalled rotor: The filter hums without turning after hair or debris has been caught.
  • Tanks of 30 to 100 L: The range covered by the Mini Plus and 1 Plus.

Installation & Replacement Guide

  • Power off: Unplug the filter and lift it out of the tank.
  • Open the motor unit: Separate the motor from the sponge section to reach the rotor chamber.
  • Replace the rotor: Take out the old rotor, rinse the chamber and fit the new one fully.
  • Test it: Reassemble, submerge, switch on and check the flow is steady and quiet.

Product Specifications & Highlights

Key Features

  • Two filters, one rotor: Covers the FAN Mini Plus and FAN 1 Plus.
  • Sealed-chamber design: Made for quiet running at low power.
  • Small tank sizes: Matches filters rated 30 to 100 L.
  • Not for the 2 Plus: The FAN 2 Plus uses a different rotor.
  • Rotor only: The filter and media are not part of the pack.

Product Details

  • Brand: Aquael (Poland)
  • SKU: 124686
  • Product Type: Spare Parts > Filter Rotor (Impeller)
  • Fitment: Aquael FAN Mini Plus and FAN 1 Plus internal filters
  • FAN Mini Plus: 30–60 L, 260 L/h, 4.2 W
  • FAN 1 Plus: 60–100 L, 320 L/h, 4.7 W
  • Contents: 1 rotor
  • Other Sizes: Aquael Rotor Fan-2 Plus (SKU 100031)
  • Target Environment: Freshwater and marine aquariums

Additional information

Weight 20.00 g
Dimensions 54.12 × 54.12 × 54.12 mm

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.